How to adjust sensitivity (pad)

Home Page Forums Cymatic Audio Forum Live Recorder LR-16 How to adjust sensitivity (pad)

This topic contains 3 replies, has 2 voices, and was last updated by Laszlo . Laszlo 10 months, 3 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #29181
    Brian Conley
    Brian Conley
    Participant

    I am trying to figure out how to adjust the sensitivity on the inputs on the LR-16. I found it in the menu with the option to turn all pads on or off. They normally stay off.
    I need to adjust it to make it more sensitive.
    Any help would be great.

    #29182
    Laszlo .
    Laszlo
    Keymaster

    Hi,

    You can set two different input sensitivity on the LR-16
    Full-scale input (pad ON) 20dBu, 7.7 Vrms
    Full-scale input (pad OFF) 8.2dBu, 2 Vrms

    There’s no further sensitivity settings available on the device.

    #29195
    Brian Conley
    Brian Conley
    Participant

    Which makes it more sensitive?
    I running direct to USB into my PC to Mixcraft recording software. With the pads OFF, I can get a small amount of signal coming in , but with the pads ON, I can’t see any signal coming in at all.

    #29196
    Laszlo .
    Laszlo
    Keymaster

    But what is your source? And what is the levels of the source?

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.