31st January 2018 at 02:01 #29395
I run a pair of X32 racks remotely with a Samsung Galaxy Tab A through a Ubiquity Loco M5 router and a switch.
I can connect to the Cymatic card wirelessly with my Windows laptop through CopperLan but haven’t yet been able to get uRemote to see the card from the tablet or my Android phone. I’ve tried to turn off DHCP using the app through the laptop and assign a static IP but it never seems to take. Any thoughts?
FOH x32 192.168.1.2
Mon x32 192.168.1.3
etc.2nd February 2018 at 13:35 #29408
Could you please tell me the firmware version on the uTrack-X32 card and the version of the uRemote on your Android device?
Please also try the following:
Connect ONLY the uTrack-X32 and the Android device to the Router and try to connect5th February 2018 at 01:53 #29427
Thanks for the reply.
Firmware and version are current at 3865 and 1.2.050 respectively.
Connected directly to the router bypassing the switch and all other devices and had the same problem:
Windows 10 laptop connects fine as long as I open the CopperLan manager first, but my Android devices still don’t recognize the card.7th February 2018 at 13:38 #29433
Please do not connect the computer with Copperlan manager. Connect only the router to the uTrack-X32 and connect the Android device to the router. Please verify the connection7th February 2018 at 18:31 #29438
That is exactly what I have done. I connected the router directly to the uTrack-x32 card and the android tablet to the router. Both the router and the tablet are indicating connected. Still when I open uRemote the uTrack is not connected and demo mode is the only option.7th February 2018 at 18:54 #29439
Could you please click on the “uR” logo in the uRemote app top left corner –> What does it say “Connected to…” or “No copperlan network detected” ?
Please also double check is that the firmware on the card 38657th February 2018 at 19:05 #29440
It says no CopperLan network detected. I updated firmware again to be safe. No change.8th February 2018 at 16:30 #29443
Does the card configured to DHCP?
If you have the computer with Copperlan manager connected you can check the IP address of the device. Please type that IP address into the browser running on the Android device –> Does it display the update page?8th February 2018 at 20:34 #29444
We’re getting close!
Entering the device ip into the android browser does show the update page and when I opened uRemote it did connect to the card for a few minutes but then disconnected and I haven’t been able to get it to connect again. I can still get to the update page through the android browser.9th February 2018 at 11:57 #29445
Do you have any Antivirus or similar application on your Android device?
Do you have a chance to try with any other Android device?20th February 2018 at 21:12 #29473
Hello! I have the same problem. When i type that IP address into the browser running on my Android device i see the update page. But URemote don’t connected to card.
Version firmware 3865, version Uremote 1.2.050.21st February 2018 at 14:28 #29474
[quote=”Potapov” post=3758]Hello! I have the same problem. When i type that IP address into the browser running on my Android device i see the update page. But URemote don’t connected to card.
Version firmware 3865, version Uremote 1.2.050.[/quote]
If you connect your computer to the same router do you able to connect with uRemore (win or OSX)?
You must be logged in to reply to this topic.