Using LP16 with STMix + click

Home Page Forums Cymatic Audio Forum Using LP16 with STMix + click

Tagged: 

This topic contains 2 replies, has 2 voices, and was last updated by dani fuertes dani fuertes 4 months, 2 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #37971
    dani fuertes
    dani fuertes
    Participant

    Hi friends.
    I’m a bit worried because I’ve just received my LP16 and I want to use it with a stereo mix of several tracks to a pair of outputs and an individual output for a tempo click which can be sent to monitor or in ears. I’m not interested to have all tracks in individual outputs cause my small mixer of PA.
    Is it possible to configure this outputs combination?
    After a first read of manual I can’t find it

    Thanks for your help

    #38424
    Laszlo .
    Laszlo
    Keymaster

    Hi Dani,

    The LP-16 does not have an option to mix audio channels to independent output. Each track assigned to one output.
    But with some trick you can solve that.

    In uTool when you create the song you have to set up the levels for your downmix, and mute the tracks (clicktrack) what you don’t want to listen in the downmix.
    Use the Headphones output to listen your downmix and use the channel output for the clicktrack

    #38426
    dani fuertes
    dani fuertes
    Participant

    Great, Thanks. I will test it
    Suggest to the designers to add the possibility to link several tracks to any output and submix all tracks to a pair. It is the only important feauture that lack in this nice product.

    regards

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.