Firmware Update not possible Home Page › Forums › Cymatic Audio Forum › Live Player LP-16 › Firmware Update not possible Tagged: Error, Firmeware, Update This topic contains 1 reply, has 2 voices, and was last updated by jali 3 months, 2 weeks ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts 3rd May 2019 at 07:59 #48064 Thorsten KerkhoffParticipant Received my LP16 yesterday with firmware 83956 on it. After installing the USB Driver for WIN10 i tried to Upadte the Firmware to 83958. The Update starts for a few % … I mean there was written something like 15 to 20%. After this there is an “popup” which means that the Update is done but no reconnect is possible. Recycle power. The LP shows the message that an Firmwareupdate is running. Waiting for a long time but nothing is happen. After shutting down the LP16 and “restart” the old Firmware is initalizing. Some good hints for me? 3rd June 2019 at 23:28 #50738 jaliParticipant LP-16 Firmware 83958 (Feb. 2018) Firmware update via USB (Windows 32bit, 64bit) (Note: Install the Windows USB audio driver before performing the update) Firmware update via USB (OSX) Release Notes (Note: No drive should be inserted in the front panel USB port for doing the update.) Best Regards Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.