17th March 2018 at 19:54 #29563
have an X32 Rack, I use an S16 to input channels 1-16. It works great.
I use the X32 inputs ( 1 to 16) to get additional instruments into the X32, for a total of 32.
What do I need to change to get the channels 17 to 32 recorded properly on the U-Track? All I’m getting is noise at the moment.
Andy19th March 2018 at 14:45 #29571
Hello Andy Sorry form my bad English, i’m from Holland.
I don’t understand your setup.
But it depens on witch AES50 port you use on your mixer, have you put your S16 in port A or B.
Then go to routing menu tab Card out and select the local inputs 1-16 and AES50 A1-8 or B1-8 for channel 17-24 and A9-16 or B9-16 for channel 25-32
also set usb card on 32 / 32 in menu > setup > tab card foor play backAttachments:20th March 2018 at 01:34 #29573
Thanks for the reply, however you didn’t read my first message properly.
[attachment=213]Screen Shot 2018-03-20 at 7.18.34 am.png
Channels 1-16, from the S16, work.
Channels 17-32, inputs locally from the X32, are recorded as noise, very loud noise.
ThanksAttachments:14th April 2018 at 12:00 #29643
I’ve tried everything.
This fucking thing does this EVERY TIME I record at a gig.
I can record on the set up at home, but at a gig, no.
Inputs 1 – 16 are from the S16. These record on tracks 1 – 16 on the UTrack.
Inputs 17 – 32 are on the X32 Rack itse;f. These record fully distorted, making the whole recording unusable.
Can any one help with this? Is it a routing issue?
Please don’t try to help like the guy above if you aren’t understanding the routing set up i have because your English is band.
Sorry if I’m angry, but this is 3 THREE fucking gigs i’ve recorded and videoed to sync up and the audio is fucked.
You must be logged in to reply to this topic.