Send MIDI Control or Note at STOP

Home Page Forums Cymatic Audio Forum Suggestion Box uTrack24 suggestions & feature requests Send MIDI Control or Note at STOP

This topic contains 3 replies, has 2 voices, and was last updated by Laszlo . Laszlo 2 months, 1 week ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #46646
    Andreas Kercher
    Andreas Kercher
    Participant

    Since I started to control Videos with the MIDI track I would really like the feature that the uTrack sends a defined MIDI event when stopping the current song. In that case, I could start another Video or stop the current video to play on and on.

    #46793
    Laszlo .
    Laszlo
    Keymaster

    Hi Andreas,

    With each multitrack song you can include one midi song which can include your custom midi commands.
    (the uTrack24 all the time sends the midi stop command when you push the stop button on the device)

    #46795
    Andreas Kercher
    Andreas Kercher
    Participant

    Hi Lazlo, thanks for the reply. I have connected the uTrack24 to the computer with a MIDI monitor to see what the device is sending. But there is no MIDI message sent when hitting stop. Maybe I need to update the firmware. I will check this later today. Most programms need a MIDI CC or NOTE for control parameters.

    #46816
    Laszlo .
    Laszlo
    Keymaster

    We have implement that in 3124 firmware release:
    “Midi Panic reset is sent on long press of STOP button. All notes off are sent when song is
    paused or stopped. “

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.