Utrack x32 on midas m32-mixing to stereo track

Home Page Forums Cymatic Audio Forum uTrack-X32 Utrack x32 on midas m32-mixing to stereo track

This topic contains 8 replies, has 3 voices, and was last updated by Laszlo . Laszlo 10 months, 3 weeks ago.

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #27695
    Jeff Stevens
    Jeff Stevens
    Participant

    I’m new to the utrack x32. Can I record separate tracks to a USB drive on my utrack USB drive and then play the tracks back on my console directly from that same drive and mix them down, adding effects and Eq etc.? Like a virtual sound check? Can I then record the stereo 2track on the USB thumb drive on the surface o

    #27696
    Laszlo .
    Laszlo
    Keymaster

    Hi Jeff ,

    The uTrack-X32 records to multichannel wav file, the channel count all the time 32 channels.
    Yes you can playback the recording on your console you need to change the routing then.
    Where you playing back the content the tracks will plays back separated channels on your console if you wish you can mix t

    #27697
    Jeff Stevens
    Jeff Stevens
    Participant

    If the card works independently of the console, why can I not play back on the card from attached drive and then record the stereo track with a second drive on the console face like the Midas M32 normally does anyway? I do not understand. Will the USB drive on the console face become disabled while playing back and m

    #27698
    Laszlo .
    Laszlo
    Keymaster

    Hi Jeff,

    There’s some misunderstanding.
    I said you cannot playback and record in the same time with the uTrack-X32 card.
    If you are using the card for playback you can still use the Midas console stereo recording feature. This feature does not depend on the uTrack-X32 card.

    #28045
    Jeff Stevens
    Jeff Stevens
    Participant

    I have tried this (mixing down a stereo track to USB on the Midas M32) and it works great. It appears to mix down to a high-quality WAV file. Very cool!

    Jeff

    #41920
    Salvatore
    Salvatore
    Participant

    Hi, why are not the effects on the recording?

    #41922
    Laszlo .
    Laszlo
    Keymaster

    Hi Salvatore,

    If you set up the recording from the input channels of the console, the routing take the signal right after the gain control, so no effects, no dynamics or fader, mute are applied on the signal. This is how the mixing console routing is done.

    • This reply was modified 10 months, 4 weeks ago by Laszlo . Laszlo.
    #41934
    Salvatore
    Salvatore
    Participant

    can you explain to me step by step what should I do? thank you

    #41937
    Laszlo .
    Laszlo
    Keymaster
Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.