uTrack24 – Analog monitoring of MADI inputs

Home Page Forums Cymatic Audio Forum uTrack24 – Analog monitoring of MADI inputs

This topic contains 2 replies, has 2 voices, and was last updated by klimermonk klimermonk 5 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #46503
    klimermonk
    klimermonk
    Participant

    Can the analog outputs of the uTrack24 be configured so that they output/monitor the *unmixed* (still separate) channels of audio being recorded through the MADI option card?

    In essence, I wondered if I could route all those separate MADI channels through their corresponding DB25 analog outputs, to an old-fashioned analog mixer for control-room, “scratch” mixing and monitoring, while the recording is in progress …. essentially using the uTrack24 as both a recorder, and a “live” MADI D/A converter. Thanks for any help you can give!

    #46530
    Laszlo .
    Laszlo
    Keymaster

    Hi,

    Please take a look at the signal flow diagram in recording mode:
    Audio path Recording

    As you can see the outputs are muted, so you cannot use the device in the same time as a D/A converter

    #46531
    klimermonk
    klimermonk
    Participant

    Very helpful, thank you for your quick response!!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.