Reply To: Utrack 24 —> Behringer X32 MADI Card Problems

Hi Toby,

Please make sure the firmware on your uTrack24 is up to date (4064) [Menu/Utilities/System details]
Please take a look here how to set up the proper clock sync on your device

If you are using the uTrack24 as recorder (receive signal from MADI) you need to make sure:
-The pre-recording enabled on the uTrack24 [Menu/Recording/Pre-Recording –> ON]
-The sample rate are matching with the MADI sample rate [Menu/Recording]
-The inputs are set to MADI [Menu/Inputs]
-The MADI configuration are matching with your system details [Menu/MADI]

If you are using the uTrack24 as Player (send signal to other MADI devices) you need to make sure:
-The pre-recording disabled on the uTrack24 [Menu/Recording/Pre-Recording –> OFF]
-You have a song on the USB drive which has a same sample rate like your MADI devices, and the song pre-loaded.
-The outputs are set to MADI [Menu/MADI/Outputs]
-The MADI configuration are matching with your system details [Menu/MADI]