Home Page › Forums › Cymatic Audio Forum › uTrack 24 › Redundant backup recording using 2 U-Track 24’s and maybe 2 ADAT cards. › Redundant backup recording using 2 U-Track 24’s and maybe 2 ADAT cards.
13th March 2018 at 16:39 #29540
LaszloKeymaster
Hi Marc,
Yes you can feed the second card input from the first card output. The volume should be same.
But take care, because that’s does not provide you a real redundancy as the slave device source rely on the master device. So this means if the master failing you’ll loose the slave device audio source. So I suggest you to use an external splitter an feed both two device separately. But this can be also tricky because if the splitter fails in this case you’ll loose both two device audio source.
