Thanks, that is what I thought.
The reason I asked this is because I want to use the uTrack24 as a backup recorder next to my DAW.
In fact they both will be recording the same signal during an important session.
But the direct outs from my mixer give a signal level that produces a recording level that is too high for the uTrack24 (compared to my DAW)
If the meters on my DAW would indicate a ‘safe’ level, this would mean the level for the uTrack24 could be too high.
At the moment I have solved this by adding resistors in the direct out connectors going to the uTrack24 (attenuators), so now the levels are matched.