Cable-Routing Suggestions

Home Page Forums Cymatic Audio Forum uTrack 24 Cable-Routing Suggestions

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #25976
    ChrisChris
    Participant

    Hi,

    We are looking at the uTrack 24 to record a live event and just have a couple of questions.

    • As our desk only has TRS insert points no direct outs on each channel, what would be the best way to connect the utrack as it has balanced inputs? (I can see that the LR-16 supports TRS but we may need more inputs)
    • Would we need to bridge the input/output or route through the utrack?
    • If connecting unbalanced inputs other than a low volume would there be any other issues?
    • Any suggestions for what cables that maybe pre-purchased or need to be built?

    Thanks for any info supplied.

    #26046
    Laszlo .Laszlo
    Keymaster

    The uTrack24 DB25 connectors following the Tascam standard. https://tascam.com/content/downloads/products/220/DB-25_Pinout.pdf
    If you need to use unbalanced connection follow this:

    Input Signal –> H (hot)
    G (ground) and C (cold) have to be common.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.