Firmware 8520 ?

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #26901
    Ian MantrippIan Mantripp
    Participant

    Hello,

    I received my LR16 this week and so far am really happy with it.
    I have a couple of questions though.

    1/ When the unit starts up, for a few second it makes sounds… almost as if there was an internal hard drive spinning. Is this normal ?
    2/ The firmware version show on start up is 8520… but according to this site, the latest version is 83859 ! Thats a big difference ! Is my version very old or am I missing something ?

    Cheers !

    #26903
    Tom SailorTom Sailor
    Participant

    There are no moving parts in the LR-16 and I have never heard a sound.

    https://cymaticaudio.com/images/downloads/drivers_and_firmware/Release%20Notes%20Cymatic%20LR-16.pdf

    Yes you can update the unit.

    #26905
    Ian MantrippIan Mantripp
    Participant

    ok, so now I have downloaded the latest firmware (on MacOSX 10.10.5)… I now have an application called “Cymatic Downloader LR16_83859” with “Available firmware Update(s)” empty list and “Connected Device” empty list. And ? What should I do next ? I cannot find any further info either in the manual or on the website.

    The device is connected , I can see it in both Logic and the Audio MIDI setup.

    Cheers

    #26928
    Ian MantrippIan Mantripp
    Participant

    No more help here ?

    Cheers

    #26929
    Laszlo .Laszlo
    Keymaster

    Hi wolfhound,

    Sorry I overlooked your message somehow.

    Please turn off the LP-16, connect to the MAC, then start the updater.
    Turn it on the LP-16 the updater sould detect the LP-16 properly. Please make sure you have no storage device connected to the LP-16 during the update.

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.