Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #28475
    Esteban Varela
    Participant

    Is it possible to monitor headphones at different levels than the outputs? I use tracks with SMPTE signal and I do not want them to sound on my headphones, but they do come out of their physical output.
    Ah, I learned to edit the song.set file in TEXT EDIT … a lot faster for me.

    #28479
    Laszlo
    Keymaster

    Hi,

    If you familiar with the setting file you must to be notice this section: ” ”
    If you do the same thing in uTool you’ll need to adjust the levels in the mixer then save it to the song.
    There’s this option in LP-16 “Menu/Outputs: Pre or Post fader” Where you can select what happens on the outputs of LP-16.

    #28496
    Esteban Varela
    Participant

    I understand the section well, but if I go below the level of track # 16 (SMPTE), in order not to hear it on Headphones, SMPTE does not come out for physical output # 16.
    So, the “PRE or POST fader” option, I do not experience any changes to the system.
    Whenever I get down to -inf level # 16 (SMPTE), nothing comes out of the physical output # 16. Although I select PRE or POST in uTool2 mixer.

    Attachments:
    #28497
    Laszlo
    Keymaster

    Hi,

    The settings file looks good.
    The uTool pre/post option just switch the level meters pre or post in the uTool nothing to do with the song.
    But you need to check the LP-16 menu: Menu/Outputs: Pre or Post fader. In PRE mode the 1-16 outputs has no level setting but the CH16 will be muted in the headphones.

    #28498
    Esteban Varela
    Participant

    You are right!.
    I was doing things wrong. I was assigning PRE-FADERS in the uTool2 software, but not in the LP-16.
    Thanks for your help. I was already happy with my LP-16, now I’m VERY, VERY happy.
    Esteban

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.