How to adjust sensitivity (pad)

Home Page › Forums › Cymatic Audio Forum › Live Recorder LR-16 › How to adjust sensitivity (pad)

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 5th December 2017 at 07:49 #29181
    Brian Conley
    Participant

    I am trying to figure out how to adjust the sensitivity on the inputs on the LR-16. I found it in the menu with the option to turn all pads on or off. They normally stay off.
    I need to adjust it to make it more sensitive.
    Any help would be great.

    5th December 2017 at 10:47 #29182
    Laszlo
    Keymaster

    Hi,

    You can set two different input sensitivity on the LR-16
    Full-scale input (pad ON) 20dBu, 7.7 Vrms
    Full-scale input (pad OFF) 8.2dBu, 2 Vrms

    There’s no further sensitivity settings available on the device.

    6th December 2017 at 07:21 #29195
    Brian Conley
    Participant

    Which makes it more sensitive?
    I running direct to USB into my PC to Mixcraft recording software. With the pads OFF, I can get a small amount of signal coming in , but with the pads ON, I can’t see any signal coming in at all.

    6th December 2017 at 10:45 #29196
    Laszlo
    Keymaster

    But what is your source? And what is the levels of the source?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.