I can’t record

Home Page › Forums › Cymatic Audio Forum › uTrack-X32 › I can’t record

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • 27th September 2017 at 11:22 #28917
    ThomasThomas
    Participant

    Hi,
    I can’t record. Is it possible that my x-32 doesn’t recognise the utrack-x32 card? Because the x-32 display shows still the x-32 card after the replacement.
    Thanks Thomas

    Attachments:
    27th September 2017 at 11:52 #28921
    Laszlo .Laszlo
    Keymaster

    Hi Thomas,

    This is normal. The card detected as X-UF card. It will work properly.

    29th September 2017 at 16:37 #28941
    ThomasThomas
    Participant

    Hi Laszlo,
    thank you for your quick response. I have to drive to my X-32 that’s why my reaction comes late now.
    I thought that X-32 doesn’t detect the utrack-card is an opinion but now I know it isn’t. So my problem is still the same – I can’t record.
    Here my “Routing” and my “Setup”:

    Attachments:
    29th September 2017 at 16:41 #28943
    ThomasThomas
    Participant

    …and here the proof:
    I tried to record channel 1 and 2.
    I converted the file with uTool2 to show you the signal by my DAW (my uRemote, used by a Windows-Laptop, has no meters so I have chosen this way to show you the (non-)signal.

    Attachments:
    29th September 2017 at 16:45 #28944
    ThomasThomas
    Participant

    doesn’t detect the utrack-card is an opinion – is wrong
    doesn’t detect the utrack-card is an opinion – is right

    Sorry!

    29th September 2017 at 16:48 #28945
    ThomasThomas
    Participant

    doesn’t detect the utrack-card is an option – is right

    Sorry!

    2nd October 2017 at 09:14 #28947
    Laszlo .Laszlo
    Keymaster

    Hi,

    Where do you want to record? What is your source?
    In this setup (Card-Out menu which is the input source for your recording) you have select the XLR local inputs on the console. So it will records from there.

    2nd October 2017 at 13:48 #28949
    ThomasThomas
    Participant

    Hi Laszlo,

    „Card-Out menu which is the input source for your recording” this is the magic sentence that makes my day happy. I just have to choose AES50 in that menu for my source and it works – fantastic.
    Thanks a lot!

    Greetings from a beginner!

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.