- 19th January 2018 at 11:51 #29367
hi, first of all – what a fantastic little gadget the lp 16 is – i really enjoy the quality of it.
my goal is to play 3 mono tracks (click, samples and timecode) to line out at the back and have only 2 of these mono tracks come out of the phones on the front.
the only way i found to do that was to set the device to “pre faders” output and mute the 3rd channel.
this works fine but as soon as i reboot the device it reverts back to “post faders” output although in the setting it will still say “pre faders”. i then have to select “post faders” confirm and then select “pre faders” again.
this is a bit annoying as i was hoping for plug and play.
another little problem is that panning seems to have no effect.
i would love to have one track one side of the headphones and the other one on the other side.19th January 2018 at 12:45 #29368LaszloKeymaster
Please make sure the device updated to 83956 firmware release this should solve both two problems what you reported19th January 2018 at 13:07 #29369
thank you for your quick response.
sorry i forgot to mention in my previous post that this is the firmware that i have the problem with.
so i still have both issues.22nd January 2018 at 13:16 #29378
any news on that topic?
where you able to replicate the issue?
otherwise i probably have to add a headphone amp to the kit.25th January 2018 at 13:12 #29384ChetanParticipant
Thanks for the input, we were able to reproduce the problem. A fix is on its way, a new firmware shall be available in 2 weeks.14th February 2018 at 21:55 #29453JamesParticipant
Thanks for the input, we were able to reproduce the problem. A fix is on its way, a new firmware shall be available in 2 weeks.[/quote]
thanks a lot. 2 weeks have passed but it seems there’s not a new firmware. or it is only me who cannot see it? someone else? thanks23rd February 2018 at 17:09 #29476LaszloKeymaster
Sorry for the delay.
The new firmware is up. https://cymaticaudio.com/images/downloads/drivers_and_firmware/Release%20Notes%20Cymatic%20LP-16.pdf
- You must be logged in to reply to this topic.