Home Page Forums Cymatic Audio Forum USB Drives General LR-16 with USB 3.0 hard drives?? And 5400 vs 7200

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #26587
    Cederick Forsberg
    Participant

    I’m soon about to try out my LR-16 for the first time and now I will need to get myself a hard drive to record to

    But almost all hard drives nowadays are USB 3.0……..

    Does that work with the LR-16? Because it says it needs “USB 2.0” in the specs… 🙁

    Also, I suppose a 7200 rpm drive is preferred over a 5400 rpm drive, but that’s also hard to find a 7200 rpm drive… All of those I can find are discontinued 🙁

    #26588
    Laszlo
    Keymaster

    Hi Cederick,

    The USB 3.0 drives are compatible with LR-16.
    You can use 5400 and 7200 rpm HDD’s both of them should work without problem.
    For the better performance please make sure the LR-16 up to date (LR-16 Firmware 83859) then format your HDD with LR-16 before start your first recording to the HDD.

    #26589
    Cederick Forsberg
    Participant

    Aha, thanks a lot! :cheer:

    I’ll try it out very soon!

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.