Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #29314
    Brandon Pierce
    Participant

    Hello,

    In Ableton Live, I am sending a MIDI track to a MIDI/DMX converter for our light rig. Once I’ve exported and dropped this .mid file onto the flash drive and into the LP-16, the MIDI out light engages, but does not get picked up by my converter box. Do I need to assign a specific MIDI out channel on the LP-16? Is this something I need to address inside uTool? Any solutions or advice would be immensely helpful.

    Thank you.

    #29315
    Laszlo
    Keymaster

    Hi,

    Please check the firmware version on your LP-16 update if necessary.
    Is that uTool 2.0.062?

    if you connect the LP-16 to your computer and use the midi port as an midi output from your computer does it work?

    #29318
    Brandon Pierce
    Participant

    Updated firmware and LP-16 is recognized in Ableton Live. I have MIDI out from Live running to the LP-16 with the MIDI out from the LP-16 into my converter box. LP-16 is not showing signs of receiving/sending MIDI, however. Do I need to have the MIDI out from my main audio/MIDI interface running into the MIDI in on the LP-16?

    #29319
    Brandon Pierce
    Participant

    Updated firmware and LP-16 is recognized in Ableton Live. I have MIDI out from Live running to the LP-16 with the MIDI out from the LP-16 into my converter box. LP-16 is not showing signs of receiving/sending MIDI, however. Do I need to have the MIDI out from my main audio/MIDI interface running into the MIDI in on the LP-16?

    #29320
    Brandon Pierce
    Participant

    Updated firmware and LP-16 is recognized in Ableton Live. I have MIDI out from Live running into the LP-16 via USB with MIDI out from LP-16 into my converter box. LP-16 is not showing signs of receiving/sending MIDI, however.

    #29321
    Laszlo
    Keymaster

    Hi,

    I sent you an email and instructions, please send us the song from the USB drive and I’ll check that problem with the midi file

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.