Home Page › Forums › Cymatic Audio Forum › Live Player LP-16 › Not all tracks play through utool
- This topic has 3 replies, 2 voices, and was last updated 5 years, 2 months ago by
John Shepherd.
- AuthorPosts
- 4th July 2018 at 19:16 #38464
John Shepherd
ParticipantWhen working on a song in uTool, I have say, 10 tracks. All levels are up, no mutes. Yet not all tracks are heard when playing back. Here are pics showing tracks 2,3,5, and 6 playing, yet no output from my Interface. A pic showing same from tracks 9 and 10. Yet tracks 1 and 2 playback through the interface. When I export this setup, it plays through the LP 16 just fine 0- all tracks. What am I doing wrong in uT
ool that all tracks don’t playback? Thanks, jshep
4th July 2018 at 19:19 #38466John Shepherd
Participant5th July 2018 at 08:47 #38522Laszlo
KeymasterHi John,
According to your pictures you are using the playback in the uTool mixer in “multitrack mode” which means each channels played out separated outputs.
As the Apollo twin not an 16channels interface I assume in this configuration you are listen the first two channels only(depending on your driver configuration on the uTool settings tab).
So with this interface you can select stereo mode in uTool mixer to play back the downmix of the channels, or you can connect the LP-16 (ASIO) and listen use the LP-16 internal mixer (headphones output) to have downmix of the channels.6th July 2018 at 03:24 #38658John Shepherd
ParticipantThank you much, sir for the good eye – I’m still a noob in ways. But, I now have 3 channels of midi controlling 3 devices via midi thru. So now I just play and sing, no tap dance on 2 pedalboards. And soundmen get separate tracks from the LP-16 while it sends us our monitor mix of instruments. Thank you Cymatic.
- AuthorPosts
- You must be logged in to reply to this topic.