Home Page Forums Cymatic Audio Forum Live Player LP-16 PC and LP-16 do not “see” each other?!

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #27557
    Fabio
    Participant

    I tried to install the drivers on my PC (WIN 7 64bit) , but the program says there’s no LP connected and the LP-16 screen says “MAC”.

    what’s wrong?

    Fabio

    #27558
    Laszlo
    Keymaster

    Hi De Rossi,

    Please make sure you have installed the KB3123479 hotfix.
    [Windows requires a new extended validation code signing(based on SHA-256) mechanism for drivers. Earlier versions of Windows 7 and Windows 8 cannot verify the new certificate, in which case please update your windows with the hotfix KB3123479.]
    If you have previously installed the LP-16 please uninstall the driver.
    Reboot your PC
    Make sure you have no USB drive connected to the LP-16
    Start the driver installation and connect the LP-16 to the PC when the driver ask you for this.

    #27559
    Fabio
    Participant

    thanks for the very quick answer! I’ll try that ASAP and let you know, my music PC it’s in my studio and there’s no internet connection there 🙁

    Fabio

    #27560
    Fabio
    Participant

    KB3123479 won’t install, neither in my home PC (has internet connection) nor in my music dedicated pc 🙁
    [both have win7 ultimate]

    what now?

    #27562
    Fabio
    Participant

    solved it myself. here’s how: start pc, F8 -> Disable Driver Signature Enforcement. FUCK YOU BILL GATES.
    :whistle:

    #27565
    Laszlo
    Keymaster

    Thank you for your feedback

    #27567
    Fabio
    Participant

    anyway my “solution” did not fix the problem at all, since everytime I turn my pc off, when I turn it on again windows refuse to accept the drivers as “genuine” and blocks ’em! so everytime I start my pc, I should disable driver signature and reinstall the drivers. this is madness. I know it’s not your fault, but PLEASE provide a workaround for this! the hotfix is not working at all as I stated before, it won’t even install, but I don’t want to install another windows version and reinstall all the programs etc., I’ve had this setup for years and it is working for my music production, so I’m not gonna update for any reason.

    #27568
    Fabio
    Participant

    btw, what usb thumb would you recommend to me? my pc has no usb 3.0 anyway.

    #27569
    Laszlo
    Keymaster

    Hi,

    Related on this windows driver issue, I recommend to contact with the Microsoft support to figuring out why that hotfix cannot be installed on your pc. If you have installed that hotfix you don’t need to spend more time on “Disable Driver Signature Enforcement” manually.
    I would like to help you but I cannot, because the other users successfully installed that hotfix and I don’t see the reason why cannot be installed on your PC.

    As the LP-16 does have USB 2.0 connector as well in this case any standard USB 2.0 or USB 3.0 drive should work properly. As the LP-16 has only playback function the drive performance not that critical like on other devices with recording functions. For a best performance please make sure the LP-16 has up to date firmware and you format the drive with LP-16 before you copy the songs on the drive.
    We have pretty good experiences for playback purpose with Sandisk Cruzer Fit; Sandisk Cruzer Blade; Verbatim Nano drives

    #28291
    Rusty
    Participant

    I have an issue my LP16 says USB INTERFACE MODE when I plug into my Dell Lattitude windows 10 machine. then I follow your instruction in another post about connecting my pc and LP16 to mix but I cannot do anything like that…The tracks play in UTOOL mixer right out of my pc speakers and the LP16 does nothing at all….any ideas?
    Thanks

    #28292
    Laszlo
    Keymaster

    Hi,

    Please make sure:
    You have no USB drive connected to the LP-16.
    You have a current driver installed on your PC.
    If you open the LP-16 mixer panel it shows the device connected.
    Open the settings in uTool then select the Audio device type to Asio and select LP-16 as output device. There’s a test button in the output device here you can verify the LP-16 successfully connected.

Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.