Playlist

Viewing 15 posts - 1 through 15 (of 25 total)
  • Author
    Posts
  • #28174
    Alf DegneboligAlf Degnebolig
    Participant

    I like to know if anybody have the same problem like me. I make a Playlist with 15 songs. But when I try to play them, No. 1. No sound comes out .

    #28175
    Alf DegneboligAlf Degnebolig
    Participant

    Its only Numer 1. song Are no sound out from nummer 2 – 15 is OK.

    #28178
    Alf DegneboligAlf Degnebolig
    Participant

    I Like to know if anybody had the same problem with Main Out. My Cymatic Audio. L. Out. -6 db. and R. out. -0db. I can’t find a way to change that. ???

    #28182
    Alf DegneboligAlf Degnebolig
    Participant

    If there is anybody who can tell me. what BIT DEPTH NOT SUPPORTED. Im a Guy from Denmark. on Utrack 24. Is comes up every time I try to Play from USB key.

    #28183
    ChetanChetan
    Participant

    Hi,

    uTrack-24 only supports stereo songs with 16bit/24bit samples.
    If you have a song with any other bit depth (for example 32 bit) , you will see this error.

    The solution for the problem would be to convert your stereo songs to 24 bit sample song.

    #28186
    Alf DegneboligAlf Degnebolig
    Participant

    I do not understand that I first make a Playlist. In. 48Khz 24 Bit and it works perfekt. and the next will not work. I made songs 2 track song In Multitrack because I like to have option for songs change from nummer one to next song.

    #28187
    Alf DegneboligAlf Degnebolig
    Participant

    I would send a Screenshot for you, how can I do that ?

    #28188
    Alf DegneboligAlf Degnebolig
    Participant

    Hi. Now I Have sitting for about 45 hours to find out to Import Songs into CymaticUtrack24. as Stereo, song. BUT In know it have to be in Multitrack/ songs. because I need to have songs goes Auto from song 1 to next song.. I find out to make the first Playlist. with 15 songs. But when I try with nummer 2 Playlist. It comes up with error. I really like to have a Manual or Screnshot how to see how to do it. Your manual are really BAD, it not tell you enything. In my world your company are very fast to sell all this things, but you do not understand there are people f.eks here IN DENMARK. So please show me Step b step. how I work with Cymatic Utrack24. Last here. Main output are. L. Ch. -6 db and R. ch. are 0db. Can I change that. ??????????? Please send me post. on danishdub@danishdub.com. regards Alf. http://www.danishdub.com

    #28189
    Laszlo .Laszlo
    Keymaster

    Hi sheriffen,

    As I seen correctly now you have a problem with the playlist creation and the song levels

    About the levels:
    Please open uTool, go to the home tab select your song in the uTrack24/Multitrack songs/”Your song where you have a level problem” in the left window.
    In the right window there’s a “mixer” option
    Open the mixer then set up all faders to the same level.
    Save the settings and close the mixer.

    About the playlist:
    Please open uTool, go to the home tab select the uTrack24/Playlist in the left window
    Click on the “new playlist” in the right window.
    In the popup window left side is the place of your source files (multitrack songs) drag and drop the songs from the left window to the right.
    Make sure the “start mode” in the right window set to “wait for button press” (as you requested to have this setting)
    Save the playlist. Close the editor

    Go to the export window then select uTrack24 as target type
    Select your playlist(s) in the left window
    Select your USB drive (what you want to use with uTrack24) in the top part of right window
    Click on the export
    Connect the drive to the uTrack24. Hit the browser window on the front panel then select your playlist to load.

    There’s two settings in the uTrack24 menu what you need to check:
    MENU/Playback/output atten. –> This is the place where you can attenuate the uTrack24 DB25 outputs globally
    MENU/Playback/Multitack mode option/Outputs/Pre or Post fade: This is the place where you can enable to attenuate the DB25 outputs by mixer levels in uTool.

    #28190
    Alf DegneboligAlf Degnebolig
    Participant

    Can anyone tell me, if I have Stereo song on Multitrack. ( Cymatic Utrack24. I have 2 songs. and I manual setting OUT -4db and song 2 change auto. thats OK. BUT now the problem. When it jump to song 2 , Fader goes up to 0db. I like to have it all set for -4 db. . How can I do this ????????

    #28191
    Alf DegneboligAlf Degnebolig
    Participant

    Hi.
    Im sorry, bur I cannot find any MIXER. can you send me Sreenshot ?

    #28196
    Laszlo .Laszlo
    Keymaster

    Every song has they own mixer parameters so you need to set mixer with the same levels for each song. But you can create mixer presets to easily recall the same settings for each song.
    Please find the screenshot attached about the mixer.

    Attachments:
    #28198
    Alf DegneboligAlf Degnebolig
    Participant

    hi. I think you missunderstand me. If I use Multitrack as you show here. I will have songs from 1-2-3-4 and so on.. But I make songs so its only comes up on L and R. Stereo song. Because this is the only way I can have a Playlist, where every song change Auto to next song. And can I send you seen shot to you ?? if I can Where ?

    #28201
    Laszlo .Laszlo
    Keymaster

    This is the way how you can include screenshots in your posts.

    Please send me proper instructions what’s wrong. And please try to follow my instructions what I sent you before

    Attachments:
    #28203
    Alf DegneboligAlf Degnebolig
    Participant

    Hi. You can see here what I do .

Viewing 15 posts - 1 through 15 (of 25 total)
  • You must be logged in to reply to this topic.