Home Page › Forums › Cymatic Audio Forum › Suggestion Box › Problem during Firmware Update
- This topic has 2 replies, 3 voices, and was last updated 8 years, 2 months ago by
solar power.
- AuthorPosts
- 20th June 2015 at 17:28 #26178
Ashwin
ParticipantI just purchased U24. While I was updating the firmware there was a power failure. Now the system is hung. It is struck in the Firmware update window. How do I reset it. Even switching the power off is not helping me.
22nd June 2015 at 10:35 #26185Chetan
ParticipantHi,
The device always has a small application (bootloader) that can do the firmware update. If the firmware update is stopped in the middle, for power failure reasons, all you need to do is do the firmware update again. After a successful update, the device will start with the proper application.
The firmware update can be done with USB cable or with over the network. Please get the relevant firmware and updating tools and manuals from https://cymaticaudio.com/downloads
24th July 2015 at 11:09 #26268solar power
Participantdigichetan’s wrote
Hi,
The device always has a small application (bootloader) that can do the firmware update. If the firmware update is stopped in the middle, for power failure reasons, all you need to do is do the firmware update again. After a successful update, the device will start with the proper application.
The firmware update can be done with USB cable or with over the network. Please get the relevant firmware and updating tools and manuals from http://www.cymaticaudio.com/downloads
Many thanks 🙂 🙂 Great help B) B)
- AuthorPosts
- You must be logged in to reply to this topic.