Home Page Forums Cymatic Audio Forum uTrack 24 Question on suggested wordclock setup on uTrack24?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #25925
    Jon P. Yarger
    Participant

    Good Day,

    I have happily been using my uTrack 24 since it came out back in November.. I have been using the unit mostly with di feeds from the board alongside a Behringer Ultragain ADA 8200 preamp for ambiance mics. I did a long recording recently and noticed I started to have drift.

    Does anyone have experience with wordclock setups on the utrack? would I benefit by using a 75ohm sync cable? Would I need a terminator for the WC “in” on the ut24?

    thanks in advance for any help.

    #25926
    Tom Sailor
    Participant

    Hi

    There is no digital I/o to synchronize so connecting the bnc will only confuse the unit I believe.

    #25928
    Jon P. Yarger
    Participant

    which part? the terminator part or using wordclock as a whole? as the ada8200 does have a wordclock in setup

    #25929
    Tom Sailor
    Participant

    You only need word clock if you are connecting via the adat connections of the ada8200. So don’t connect it.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.