Sync uTrack24 with different option cards

Home Page › Forums › Cymatic Audio Forum › uTrack 24 › Sync uTrack24 with different option cards

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 25th August 2017 at 10:38 #28748
    Alan
    Participant

    When two or more units are synced together can one use a Midi card for input and the other use an ADAT or AudioLan card, or use just analog.

    How are the audio sync issues worked out with multiple digital sources?

    Thanks,
    Alan

    25th August 2017 at 11:03 #28749
    Laszlo
    Keymaster

    Hi,

    Each device can use analog or digital inputs. On each device you’ll able to select inputs in 8channels groups.
    If you are using digital card you’ll need to set up the clocks properly.
    You can find detailed info here:
    Sync: https://cymaticaudio.com/images/downloads/manuals_and_brochures/uTrack24_SyncManual.pdf
    Clock Setup: https://cymaticaudio.com/images/downloads/manuals_and_brochures/uTrack24_Synchronization.pdf

    25th August 2017 at 18:52 #28750
    Alan
    Participant

    Thanks for the fast response. I’ve looked over the two sync manuals, and it looks like the answer is yes, but I will need to tie the recorders and any digital audio sources together via a word sync cable. This seems logical.

    I’ll probably buy a second uTrack24 to make a 16/48 channel recorder.

    Alan

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.