USB Interface and USB-Recorder simultaneously

Home Page Forums Cymatic Audio Forum uTrack 24 USB Interface and USB-Recorder simultaneously

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #28328
    FabiFabi
    Participant

    Hello,

    I found this USB-Recorder on the internet and I think it is a very attractive product!
    But I have one question. I didn´t find it in the manual or internet.

    Is it possible to record on a PC (uTrack used as a interface to the DAW) and simultaneously on a USB-Flash device, which is connected with the uTrack24?

    This function will be very helpful. Because when there is a problem with the computer and the computer hangs up then I don´t want to lost my recording. So I have the chance to load the recording from the USB-Flash device.

    So the “USB-Flash device – Recording mode” should be used as a Bachup-Recorder.
    I will do some live-recordings. There is a Backup-system very important (furthermore I will have a Stereo Backup-Recorder, that will record the Main-microphone).

    Thank you for your answer!!
    And thank you for this perfect product! 🙂

    Fabi

    #28360
    ChetanChetan
    Participant

    Hi Fabi,

    Unfortunately this is not supported. When the device is being used as a StandAlone recorder, the interface mode is not active.

    Hope this helps.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.