Home Page › Forums › Cymatic Audio Forum › uTrack 24 › Using utrack 24 with synths
- This topic has 2 replies, 3 voices, and was last updated 4 years, 2 months ago by Laszlo.
- 26th December 2018 at 11:07 #43861OriolParticipant
Would the utrack 24 be a good option as an audio interface with logic x and a few analog synths.
The synths hsve unbalanced outputs. Would it be an issue connecting to the balanced inputs of the utrack 24.
Which cables would I use ?
Any help would be much appreciated26th December 2018 at 16:28 #43862JulianParticipant
Let me advice you that using cymatic utra k24 for real time performance is not very suitable.
If your interest is to play synths and record them real time the low latency audio drops make it near impossible not only to record anything but to play anything.
I’ve been struggling with this problem for a lot of time and now looking for an alternative to cymatic.
Yes, it’s cheap and for playing recorded tracks ok, but if you want it as the centerpiece of your studio they need to improve their system quite a lot yet.7th January 2019 at 15:25 #44065LaszloKeymaster
Thank you for your feedback.
Yes, true the uTrack24 designed mainly for live playback and recording, however in USB interface more you should able to have decent performance as well, but definitely not designed to be a center piece of the studio less than 400€ price range.
What was the minimum latency what you were able to use? Core audio or Asio?
- You must be logged in to reply to this topic.