Using Utrack24 with adat option card as a AD/DA - Cymatic Audio

Tagged: ad/da, adat, analog, soundcard, uTrack24

This topic has 1 reply, 2 voices, and was last updated 3 years, 11 months ago by Laszlo.

Viewing 2 posts - 1 through 2 (of 2 total)

Author
Posts
22nd September 2019 at 17:48 #61281
Minart Leo
Participant
Hello,
I’m wondering if any of the inside routing possibilities of the Utrack24 can offer me to plug the adat Ins & Outs to another soundcard say maybe an RME with 3 adat In/Out and then use the analog Ins & Outs of the Utrack,
Hope I made myself clear
Thanks,
Leo from France
30th September 2019 at 15:17 #62283
Laszlo
Keymaster
Hi Leo,
The uTrack24 has 3 different modes.
USB host player (the inputs are muted)
USB host recorder (the outputs are muted)
USB interface mode (you need to connect to a computer)
In USB interface mode:
In the uTrack24 you need to select between to use analog or digital inputs (in 3×8 channels groups)
The outputs are using the analog and the digital in the same time.
Please take a look at the signal flow:
Author
Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.