Home Page Forums Cymatic Audio Forum uTrack-X32 uTrack-X32 Set Up

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #28315

    Hi folks,

    I have been using the uTrack-X32 for some time now, with great success.

    I have changed my set up a little, adding in an S16 box.

    How do I set up the routing to record what comes into the S16?

    Also, we play with backing tracks via the USB player on the X32, on channels Aux 7 and 8, labelled USB L and USB R

    How do I record these to the uTrack-X32?

    Any help much appreciated.





    Been messing around with this, and discovered to record from the S16 you need to set the card output to S16,1-8, and 9-16 (for recording the 1-16 channels.

    Recording the USB was a little tricky.

    I had to move the USB L and R from where they were to where AUX 1 and 2 were, and select source there as USB L and R.

    Then I need to make sure the faders were up, otherwise recording didn’t happen.

    Hope this helps anyone doing this sort of thing.


Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.