uTrack24 - Analog monitoring of MADI inputs - Cymatic Audio

Tagged: uTrack24 MADI D/A

This topic has 2 replies, 2 voices, and was last updated 4 years, 5 months ago by klimermonk.

Viewing 3 posts - 1 through 3 (of 3 total)

Author
Posts
27th March 2019 at 20:38 #46503
klimermonk
Participant
Can the analog outputs of the uTrack24 be configured so that they output/monitor the *unmixed* (still separate) channels of audio being recorded through the MADI option card?
In essence, I wondered if I could route all those separate MADI channels through their corresponding DB25 analog outputs, to an old-fashioned analog mixer for control-room, “scratch” mixing and monitoring, while the recording is in progress …. essentially using the uTrack24 as both a recorder, and a “live” MADI D/A converter. Thanks for any help you can give!
28th March 2019 at 14:29 #46530
Laszlo
Keymaster
Hi,
Please take a look at the signal flow diagram in recording mode:

As you can see the outputs are muted, so you cannot use the device in the same time as a D/A converter
28th March 2019 at 15:13 #46531
klimermonk
Participant
Very helpful, thank you for your quick response!!
Author
Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.