Utrack24 AudioLan DANTE Pb Clock Sync

Home Page Forums Cymatic Audio Forum uTrack 24 Utrack24 AudioLan DANTE Pb Clock Sync

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #170282

    Hello, I have a problem with the sync clock.
    Config : Behringer WING console with dante card with a Utrack24 equipped with AudioLAn firmware 4078.
    I use the Utrack just as an audio player (no recording)

    when i unplug the Utrack24 the synchro is OK and i have signal coming from my macbook in the Wing but when i connect the Utrack24 on the Dante network then the WING card loses the syncho Clock and i have no signal coming from the MacBook and of course nothing from the Utrack since the Dante card in the Wing has no syncho Clock.

    Main settings :
    Dante Wing (AES67 Enable)
    RTP multicast prefix 239.69.xxx.xxx

    Utrack :
    Stream provider
    Stream 1 in
    Stream 2 in
    Stream 3 in

    Can you give me some hints for research?


    my problem is solved, after several research the pb came from the Utrack which is in clock master.
    I have to select ‘Slave only’ instead of ‘Preferred master’ in the Advanced / PTP tab


Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.