UTRACK24 to Unbalanced PHONO Jacks

Home Page › Forums › Cymatic Audio Forum › uTrack 24 › UTRACK24 to Unbalanced PHONO Jacks

Tagged: , , ,

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 6th May 2021 at 17:19 #149610
    Ben Cook
    Participant

    I want to connect the UTRACK24 to some equipment with unbalanced RCA / PHONO jacks and I’m in the process of putting a cable together. What is the correct way to do this electrically without damaging the UTRACK24? Is it acceptable to short the cold signal to GND in the cable as can be done with XLR to PHONO adapters? E.g:

    https://www.mediacollege.com/audio/connection/xlr-rca-1.html

    I need to be able to record or playback via this interface.

    Thanks in advance.

    Ben

    19th May 2021 at 13:24 #151166
    Laszlo
    Keymaster

    I would recomend to take the singal from the RCA hot pin to the XLR pin2 and connect the RCA Gnd to the XLR pin1

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.