wave file but no audible audio

Home Page Forums Cymatic Audio Forum uTrack-X32 wave file but no audible audio

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #29034
    Lex AmreinLex Amrein
    Participant

    Hello,

    Just installed the uTrack-X32 optioncard and inserted an SSD HD to it and recorded some tracks.
    First of all the control option via iPad doesn’t work, no start
    /stop/record function is possible and when pushing the record button on the card, you see it’s goining to record also on the iPad.
    I can control my X32 with the iPad so the router isn’t the problem.

    When I import my recorded files of tyne HD in my LogicX I can see waveforms but hear no audio, no matter what routing I choose.
    What can be the problem?

    Kind regards Lex

    #29035
    Laszlo .Laszlo
    Keymaster

    Hi

    To able to use the uRemote on your iPad the card firmware must to be updated to 3865 firmware. Firmware update Firmware update

    If your files has no audio it must be a routing issue:
    For detailed information, please refer to the X32/M32 console’s User Manual, and its instructions for routing audio in and out of the console.

    The uTrack-X32 can record from, and playback to, various channels in your mixing console:

    To select the audio channels that you plan to record, go to the console’s menu “Routing” / “Card Out”.
    For example, to record the X32/M32 console’s analog inputs, select “Expansion card outputs 1-8” to “local 1-8”, and so on.

    To configure the playback channels, go to the console’s menu “Routing” / “Home“.
    For example, to playback from USB harddisk to the mixing console’s local analog inputs, select “input 1-8” to “card 1-8”, and so on.

    Once you have the recordings on the USB drive use the uTool import function to make mono files from the multichannel wav files

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.