uTrack-X32 (Live Recorder & Player & Interface for X32/M32)
Discontinued product August 2019

X-32_0057_ret2-S
Utrack-x32_v01-s
X-32_plain-s
Cymatic Audio’s uTrack-X32 expansion card for the world-class M32 and X32 family of consoles is fitting snugly into the expansion card slot of the M32/X32 console, the uTrack-X32 adds full multitrack capabilities, completely independent and non-intrusive to your console’s mixing operations.       
  • Simply record 32 channels directly to USB storage with just one touch of a button? A simple way that lets you reliably record hours of audio without having to wonder where to put your laptop, additional USB wires, opening new sessions, create tracks, arms tracks? A recorder that you can ‘Set-and-Forget’ till the show is over, knowing that later you can easily transfer your recordings into your favorite DAW?
  • Start the sound check at your convenience, without having to wait for the musicians, all while looping certain passages on the fly and giving you ample time to rehearse and fine-tune your best mix ever?
  • Control this recorder conveniently from your OS X, Windows, iOS or Android device if you wanted to?
  • Enjoy all of the above features, while preserving your console’s ability to act as a 32X32 USB interface if you needed it to?
Expand your X32/M32 console beyond mixing and create a self-contained mixing, recording & playback powerhouse.
  • 32 channel recording directly from your console, no computer or tablet needed
  • Simple one-button “Push and Go” user interface to record
  • Remote control with uRemote software (Android, Win, IOS, OS X)
  • USB computer audio interface for Windows, OS X and iOS (32-input, 32-output)
  • Recorder features:
    • 32 tracks of recording or playback (up to 48kHz/24bits)
    • “Pre-Record” mode ensures you never miss a downbeat again
    • Conveniently create new takes during ongoing recording
    • Works with user-supplied, off the shelf USB hard drive for storage
    • Recording time limited only by size of USB storage
  • Playback features (NEW)
    • Playback pre-defined playlists with custom start-modes
    • “Instant Play” feature pre-loads playlist songs in memory to be played back instantly from uRemote
    • Edit playback song order on the fly with uRemote
    • Gapless playback with multiple songs using the no-delay start mode
    • Playback songs withing a folder with different playback modes (single, continuos, shuffle etc)
  • Ethernet network interface for remote control from uRemote software
  • Free uRemote applications for Windows, OS X, iOS and Android:
    • Detailed uTrack-X32 status information
    • Large transport control buttons- Create location markers ‘on the fly’ when recording
    • Create playback loops ‘on the fly’- Browse and select songs on connected drive
    • Change uTrack-X32 settings
  • Free uTool software applications for Windows and OS X allows to conveniently:
    • Transfer audio content between uTrack-X32 and computer
    • Extract mono wave files from recordings for importing into any DAW
    • Create multitrack songs up to 32 channels, for playback from uTrack-X32
The uTrack-X32 is compatible with the following mixers: ·        X32 ·        X32 Compact ·        X32 Producer ·        X32 Rack ·        X32 Core ·        M32 ·        M32C ·        M32R

System Requirements USB Audio Interface Mode

OS X

Operating Systems:
  • Mac OS-X® 10.8 or higher
Hardware: 
  • Any Mac hardware compatible with OS X 10.8 or higher
  • 512 MB Ram (1GB or more recommended)
  • One available USB 2.0 compatible port

IOS

Operating Systems:
  • iOS® 5 or higher
Hardware:
  • iPad® 2 or newer
  • Apple® iPad Camera Connection Kit (for iPads with 30-pin connector)
  • Apple Lightning to USB Camera Adapter (for iPads with Lightning connector)
Driver Installation: There is no driver installation for the iPad® necessary. Simply connect the uTrack-X32 to your iPad® by connecting a USB cable to the uTrack-X32 USB connector on the rear panel, and the iPad® using the appropriate Apple USB adapter. The uTrack-X32 can now be used as a 32-input, 32-output audio interface with the iPad® and appropriate multi-channel iOS recording software.

WINDOWS

Operating Systems (32- or 64bit): Windows 7, Windows 8, Windows 10 (32-bit and 64-bit) Hardware:
  • Pentium® IV 1.2 GHz or better
  • 512 MB Ram ( 1GB or more recommended)
  • One available USB2.0 compatible port on PC

uRemote

Remote Control App

uTool

File conversion / Playlist Editor
For Software, Drivers, Firmware and more please login here.
Software, Drivers & Firmware
Where can you Buy?